| S.No. |
Research Topics |
Paper ID |
| 1. |
Effect of Spindle Speed and Feed Rate on Surface Roughness and Material Removal Rate of AA6063A in CNC Turning Using Response Surface Methodology
C.JohnJoshua, N.Rajakumar |
IJRMET/052/A-1140 |
| 2. |
Excavator Bucket Tooth Failure Analysis
Kalpak. S. Dagwar, R.G. Telrandhe |
IJRMET/052/A-1141 |
| 3. |
360° Rotating Vehicle to Overcome the Problem of Parking Space
Jaishnu Moudgil, Shubhankar Mengi, Mudit Chopra, Dr Jaswinder Singh |
IJRMET/052/A-1142 |
| 4. |
Analysis of Pitch Variation of Helical Coil Receiver for Solar Parabolic Dish Concentrator
Manav Sharma, Jaykumar Vaghani, Nitesh Bihani, Niranjan Shinde, Vijay.C. Gunge |
IJRMET/052/A-1143 |
| 5. |
Generating Voltage Using the Concept of Free Energy
Dr. Jaswinder Singh, Manjyot Singh Syan, Nitin Arora, Sambhav Garg, Tushar Kamra |
IJRMET/052/A-1144 |
| 6. |
Single Acting Piston Pump Using Oscillating Motion
Gowrishankar.K, Gobinath.M, R.Gani |
IJRMET/052/A-1145 |
| 7. |
Modal and Transient Analysis of a Single Disc Rotor System
V. Jangde, M. Chouksey, J. Patil, V. Jain |
IJRMET/052/A-1146 |
| 8. |
Calculated Performance of Misaligned Finite Circular Journal Bearing
V. K. Bhatt |
IJRMET/052/A-1148 |
| 9. |
Repair of Notched Cantilever Beam by Piezoelectric Material
K.Mahesh Babu, Dr. K.Sivaji Babu, U. Koteswara Rao |
IJRMET/052/A-1149 |
| 10. |
Study of the Misalignment of Test Specimens Submitted to Fatigue Test Through Different Fastening Systems
Lisiane Trevisan, Daniel Antonio Kapper Fabricio, Afonso Reguly |
IJRMET/052/A-1150 |
| 11. |
Compressed Air Engine
SwadhinPatnaik |
IJRMET/052/A-1151 |
| 12. |
Paper has been Removed Due to Copyright Issue |
|
| 13. |
Analysis of Spring and Damping Coefficients for Misaligned Finite Circular Journal Bearing
V. K. Bhatt |
IJRMET/052/A-1153 |
| 14. |
Lean Manufacturing: A Review
Gaurav Sharma, Sahil Nandwani, Karamdeep Singh |
IJRMET/052/A-1154 |
| 15. |
Experimental Evaluation of Emission Characteristics of CIDI Engine Fuelled with Jatropha Curcas Oil Methyl Easter
Sirivella Vijaya Bhaskar, G. Satish Babu |
IJRMET/052/A-1155 |
| 16. |
Design and Development of Roll Cage for an All Train Vehicle – SAE BAJA
Manjot Singh, Suraj Ghimire |
IJRMET/052/A-1156 |
| 17. |
Effect of Process Parameters on Surface Roughness and Material Removal Rate in EDM
Kawaljit Singh Randhawa |
IJRMET/052/A-1157 |
| 18. |
A Generic Model for the Selection of Manufacturing Method Based on Multi Objective and Multi Function Criteria
Girish R. Naik, Dr. V.A.Raikar, Dr. Poornima G. Naik |
IJRMET/052/A-1158 |
| 19. |
A Brief Research Review For Study of Friction Welding on Metallic and Bimetallic Welds
Jagroop Singh, Rakesh Kumar |
IJRMET/052/A-1159 |
| 20. |
Design and Analysis of Welding Fixture for Tacking and Welding of Inner Boom of Loadall Handler
A. M. Mhaske, R. M. Metkar, S. D. Hiwase |
IJRMET/052/A-1160 |
| 21. |
Design and Manufacturing of Fsae Vehicle- Selection, Modification, Static and Dynamic Analysis of Fsae Vehicle.
Upendra S. Gupta, Savan Parmar, Prasanna Gupta, Rahul Singh |
IJRMET/052/A-1161 |
| 22. |
Fault Detection of Conditioned Thrust Bearing Groove Race Defect using Vibration Signal and Wavelet Transform
Dr. S.V.Kshirsagar, G.R. Chaudhary |
IJRMET/052/A-1162 |
| 23. |
Cost Optimization for Generating 3D Curved Surfaces in CNC 3-Axis Machine by Using CAD/CAM
Vishal Shrivastava, Prabhash Jain |
IJRMET/052/A-1163 |
| 24. |
Automatic Clamp Embossing and Ejecting Using PLC
Pulla Reddy.M, Rajesh.B, Sai Manideep.K, Sree Vidhya.G |
IJRMET/052/A-1164 |
